4 Zone Fire Detection Panel Inim Smartline @ EN54-2/4/21

4 zone conventional fire detection center expandable up to 20 with the addition of the SmartLine/8Z board.

The panel has supervised outputs for the activation of audio-visual signalling devices, a customizable relay output, fault signaling outputs and two 24V outputs. Each detection zone provides a terminal which can be configured as open collector output (activated by programmable conditions), supervised input or 4-20mA gas detector interface.

Product Information

• The system information is provided through the graphic display and LEDs on the control panel frontplate.
• Supports up to (32) devices per zone.
• (1) supervised alarm output, (1) output for communication device activation (dialer), (1) dry-contact alarm output, (1) dry-contact fault output, (1) ancillary power supply output, (1) interruptible power supply output.
• Battery charge optimization (via thermal probe) and battery shutdown relay for deep discharge conditions.
• Automatic balancing of individual detector lines.
• RS485 BUS port which supports up to (4) remote repeater panels and (2) power-supply stations which can be connected in such a way as to allow supervision of their operating capability and activation/deactivation of their output power during predefined conditions.
• RS232 connector for programming via PC.
• The SmartLAN/485 board allows the control panel to connect to an Ethernet network for remote access via the Internet. Once the remote connection has been established, it is possible to modify the configuration parameters and/or manage the system by means of the supervisory software SmartLeague.
• Metal enclosure
• Dimensions: 322 (H) x 324 (W) x 86 (D) mm

Batteries not included (2 x 12V/7Ah)